Examples
Five layouts planned in Gauge Buddy, from a first oval to a room-sized main line. Each one uses real track from the built-in libraries, joins exactly, and passes the app's checks with no warnings.
Every layout can be downloaded to open in Gauge Buddy. Unzip the download, then double-click the .railplan file.
First Oval
SimpleA single oval with one siding: the layout most of us started with.

Eight curves and seven straights make the circuit, with a turnout in place of the eighth straight to give a siding beside the platform. It is small enough to live on a coffee table and takes a few minutes to lay out.
It is a good first project in Gauge Buddy too: every piece snaps to the last, and the oval closes exactly.
What it shows
- Placing and joining sectional track
- A turnout and siding
- Scenery sized for N
Download First Oval.railplan, zipped
- Scale
- N
- Board
- 900 × 560 mm
- Track
- Peco Setrack, code 80
| Code | Piece | Qty |
|---|---|---|
| ST1 | Standard straight | 8 |
| ST12 | No.1 radius double curve | 8 |
| ST3 | No.1 radius standard curve | 1 |
| ST6 | No.1 radius turnout, left hand | 1 |
Quayside Shunting Shelf
SimpleA three-siding shunting puzzle on a shelf just 300 mm deep.

No circuit at all: a headshunt, two turnouts and three sidings. Layouts like this are built for shunting, sorting wagons into order with as few moves as you can, and they fit where a continuous run never would.
Eight pieces of track. The second turnout sits on the first siding, so the three roads fan out at the standard Setrack spacing.
What it shows
- An end-to-end plan with no circuit
- A fan of sidings from two turnouts
- Planning to a narrow board
Download Quayside Shunting Shelf.railplan, zipped
- Scale
- OO
- Board
- 1200 × 300 mm
- Track
- Peco Setrack, code 100
| Code | Piece | Qty |
|---|---|---|
| ST200 | Standard straight | 1 |
| ST201 | Double straight | 2 |
| ST204 | Long straight | 1 |
| ST225 | No.2 radius standard curve | 2 |
| ST241 | No.2 radius turnout, left hand | 2 |
Twin-Track Door Layout
IntermediateTwo trains running at once, with a siding off each circuit, on a board the size of an interior door.

A double-track main line in Kato Unitrack, with the two circuits at Unitrack’s 33 mm spacing. Two trains can run continuously in opposite directions, which makes it a satisfying layout to watch.
Two #6 turnouts on the inner circuit lead to sidings, one by the goods shed and one for stabling a second train. A road crosses both lines on a level crossing, and the station sits on the outside of the circuit where there is room for the platform and building.
What it shows
- Concentric curves at a fixed track spacing
- Sidings from turnouts, brought parallel with a closing curve
- A level crossing that spans the track
Download Twin-Track Door Layout.railplan, zipped
- Scale
- N
- Board
- 1980 × 760 mm
- Track
- Kato Unitrack
| Code | Piece | Qty |
|---|---|---|
| 20-000 | Straight 248 mm | 22 |
| 20-040 | Straight 62 mm | 2 |
| 20-110 | Curve R282 45° | 8 |
| 20-120 | Curve R315 45° | 8 |
| 20-160 | Curve R481 15° | 2 |
| 20-202 | #6 turnout, left hand | 2 |
Ashcombe Junction
IntermediateA double-track oval with a country station, on the classic 8 × 4 ft board.

Second and third radius curves give a double-track main line, with a siding off the inner circuit serving the station platform. A signal box, goods shed and water tower sit around it, and a road crosses the far side on a level crossing.
This is the layout used in the screenshots throughout this site.
What it shows
- A double-track main line in Setrack
- A station built from the scenery catalogue
- Sixty-nine pieces that close exactly
Download Ashcombe Junction.railplan, zipped
- Scale
- OO
- Board
- 2440 × 1220 mm (about 8 × 4 ft)
- Track
- Peco Setrack, code 100
| Code | Piece | Qty |
|---|---|---|
| ST200 | Standard straight | 35 |
| ST225 | No.2 radius standard curve | 17 |
| ST230 | No.3 radius standard curve | 16 |
| ST241 | No.2 radius turnout, left hand | 1 |
Elmstead Road
AdvancedA room-sized main line with crossovers, a passing loop, a goods yard and a turntable.

A double-track circuit runs around a central operating well, cut out of the baseboard to give you somewhere to stand in the middle. Two crossovers let trains change between the circuits. The station has a passing loop, closed with a short length of flexible track where the sectional pieces do not quite meet.
A fan of three sidings forms the goods yard, and a flexible curve leads from a spur round to the turntable. The east side carries a road over both lines on a level crossing.
What it shows
- A baseboard with a cutout
- Crossovers between two circuits
- Flexible track joined to sectional track
- More than a hundred pieces, with no warnings
Download Elmstead Road.railplan, zipped
- Scale
- OO
- Board
- 3000 × 1800 mm, with a 1000 × 500 mm operating well
- Track
- Peco Setrack, code 100, with Streamline flexible track
| Code | Piece | Qty |
|---|---|---|
| ST200 | Standard straight | 53 |
| ST201 | Double straight | 3 |
| ST225 | No.2 radius standard curve | 22 |
| ST230 | No.3 radius standard curve | 16 |
| ST240 | No.2 radius turnout, right hand | 3 |
| ST241 | No.2 radius turnout, left hand | 7 |
| SL100 | Flexible track, in two runs | 770 mm |
These are plans, not kits. Part counts come from the layouts as drawn, using the manufacturers' published dimensions. Check a current catalogue before ordering, and test-fit real track before fixing anything down. To plan your own, start with the getting started guide or the documentation.
Plan one of your own.
One Mac app. No account, no cloud, nothing to set up.
Download on the Mac App StoreRequires macOS 15 or later.